#ALDL CODE READER FOR FREE#
#ALDL CODE READER FULL VERSION#
#ALDL CODE READER SERIAL#
#ALDL CODE READER DRIVER#
#ALDL CODE READER UPGRADE#

1986 to 1995 are using either OBDI conector or a newer style OBDII connector. This connector is located under the steering wheel.Р”Р„LL US made vehicles with OBDI computers from approx. Later Australian Commodore models (VR, VS, etc.) also use a 16 pin OBD-II style connector, but the pinouts are unique to Australia. Even though it is an OBD2 connector, it has an OBD1 system behind it on these 94-95 cars. Some 1994-95 cars have the 16 pin OBD2 connector (shown below), Corvette's, Camaro's, and LT1 cars among them. This connector is also found in the Holden JE Camira and the Nissan LE Pulsar. The pin numbering scheme is the same as that used on the VN/VP Holden Commodores (but those vehicles used the 6 pin connector shown above). Here's a view of the 12 pin US style ALDL connector, and where to connect the above circuit to.

You'll find this connector under the glove box on the VN/VP. The data from this connector is at 160 baud when the diagnostic link is a 10k ohm resistor. The diagnostic link, a paper clip (red dotted line), is used to enable 'flashing diagnostic mode', and is not described here. In Australia, the VN and VP models used a 6 pin connector. There have been at least four different ALDL connectors used world wide (and probably more exist too). To determine which ECM/PCM your particular car has, this ECM/PCM cross reference page may be of use.

Read the documentation for the particular software package you are using. Some of these programs have different data files that must be loaded for your car, others have drop down menus for you to chose your ECM/PCM. You can use it 20 times on data recording runs before purchasing a key, and you can view previously recorded data any number of times while on trial, before purchasing a key.Р”Р‡or each of these packages, the proper version or data file for your car's ECM/PCM must be used when you are doing your data collection.

TTS DataMaster is an excellent package in the way it's laid out and the data it provides.

#ALDL CODE READER FULL VERSION#

There is a free version (allows up to one minute of data logging - most dragstrip runs are less than that), and the full version is available for a nominal charge. Paul Blackmore has written this software with lots of graphics in mind, with multi vehicle compatibility the goal. TunerPro supports GM OBDI (pre-96), Ford EECIV and EECV, and late model Subaru (WRX) vehicles.

#ALDL CODE READER FOR FREE#

This project started as an 'educational' project started with a few simple goals: It should be available for free in its essence, it should be better than whats available in its class, it should remain as simple as possible to use. TunerPro has since grown into a very robust tuning tool and is evolving faster than ever. It was created primarily to tune GM vehicles between model years 19. TunerPro started life as GMECM Edit, and debuted in early March of 2003. TunerPro is a free, donate-if-you-like-it tuning platform aimed at making tuning easier and cheaper. Software and useful information for pontiac The data is presented in a way that will help when tuning a car after engine modifications. WinALDL is a program that reads the ALDL data from some supported ECM types.

#ALDL CODE READER DRIVER#

The intent is to provide more information to the driver so that range and performance can be optimized. EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. Lotus Elan M100 ALDL diagnostic software 'ElanScan'Р”Р‡ree software written specially for Lotus Elan M100 Works great with older laptops on Win98/MSDOS that don't have USB ports though.

Won't work with USB adapters, and won't work with WinXP/2000. This is the DOS-based software for GM TPI and 93 LT1.

#ALDL CODE READER SERIAL#

Shareware DOS-based software for ALDL vehiclesР”В®CM852 Serial ALDL Software (direct download link)

#ALDL CODE READER UPGRADE#

There is a data logging upgrade version available for a very good price. Specifically targeted towards the 1994/1995 F/B/Y body LT1 cars, it works very well and provides you with a very easy to read, no frills user interface.

2.0L, L4, SOHC Turbo Engine (VIN code M).

GM Pontiac 3.2 (also 1991 Z-34 Lumina, 3.4L DOHC, W-Body) Lotus Esprit - All 4 cylinder models with GM Fuel-Injection There are a number of excellent software packages available, with some of them being free and others giving you a trial period of fully functional use.Р”Р‡reeScan is a free software that supports the following vehicles

Aldl code reader